ABSTRACT The selection of key additive materials for a new type of oil-based drilling fluid was studied in this paper. The oil-based drilling fluid can strengthen well walls and ensure safety. It is suitable for high-temperature and high-pressure wells, deep wells and ultra-deep wells. A new type of high-temperature white oil-based drilling fluid was prepared by using 5# white oil as continuous phase, HIS as thickening agent, SDBS as emulsifier, and asphalt powder oxidized at 180°C as filtration agent. The results showed that the saturation concentration of sodium dodecyl benzene sulfonate (SDBS) was 4%, the saturation concentration of asphalt powder oxidized at 180°C was 4%, the saturation concentration of Tween-80 was 10%. The final resistance of high temperature and high pressure oil based drilling fluid formulation material is: No. 5 white oil + 4% SDBS + 5% modified bentonite + 4% asphalt powder oxidized at 180°C + 10% Tween-80 + 1.5% Barite + CaO. The performance evaluation of the new oil-based drilling fluid shows that shale expansion is 0.21mm, anti-temperature up to 220°C, and anti-pollution ability is good. The rheological properties, resistance of high-temperature high- pressure have been greatly improved. Therefore, the new white oil-based drilling fluid can resistance of high- temperature and also has low toxicity, which can meet the exploration and development of more complex wells.

Abstract Prediction of the development stage of flat peach is very important to determine the harvest time and guarantee high quality peach fruit. The objective of this study was to predict the development stage of flat peach by applying the SVR model based on characteristic taste attributes changes. Seven development stages were divided into immaturity stage (F1-F5) and maturity stage (F6-F7) according to PIs analysis. Both human sensory evaluation and electronic tongue showed that sourness and bitterness significantly decreased, while sweetness increased during seven development stages (P < 0.05). PCA result revealed that sourness and sweetness attributes had a high correlation between human sensory evaluation and electronic tongue. HCA classified seven development stages as two clusters, which was consistent with the PIs analysis. Seven development stages of flat peach were accurately predicted by the SVR model and the correct rate (CR) was 93.9%. The mean squared error (MSE) of each evaluation index was around 0.14 and the squared correlation coefficient (SCC) was over 0.99, which indicated the model performed well. This study proved that taste attribute could be used as an index combined with the SVR model to accurately predict the development stage of flat peach.

Abstract To observe the influence of thalidomide on tumor necrosis factor-a (TNF-α) of spontaneous type-2 diabetes rat (kk-Ay rat) model, and to explore the clinical value of TNF-a mediated inflammation approach to improve the injury on epithelial cell of kidney tubules. There are 30 kk-Ay rates being chosen to establish the Diabetic Nephropathy model and divided into thalidomide group and the model control group, 15 pieces for each group respectively. The levels of TNF-α, IL-1β, interleukin -6 (IL-6) and interleukin -18 (IL-18) of kk-Ay in the thalidomide group and the model control group were both at a higher level before treatment, but the difference was not statistically significant (P >0.05); The levels of TNF-α, IL-1β, interleukin -6 (IL-6) and interleukin -18 (IL-18) in kk-Ay rats 8/10/12 weeks after the treatment in the thalidomide group were significantly decreased, with statistically significant differences compared with the model control group (P < 0.05). The histopathological changes of kidney tubules epithelial cell injury on rats were observed through dissection. Thalidomide will effectively lower TNF-α and IL-1β expression levels in kk-Ay rat models, reduce inflammatory response, and thus improve damage on kidney tubules epithelial cell, which is worthy of further exploration and application.

Abstract Inflammatory bowel disease (IBD) is a chronic inflammatory disorder of the intestine, demonstrating an increasing incidence every year. TongXieYaoFang (TXYF) has been used widely in China as a complementary therapy to relieve the symptoms of IBD for hundreds of years. In the present research, a network pharmacology-based approach was used to systematically explore the intrinsic mechanisms of TXYF in IBD at the molecular level. Network pharmacology-based methods, which mainly included database mining, screening of bioactive compounds, target prediction, collection of IBD-related targets, gene enrichment analysis, network construction, and molecular docking, were employed in the present study. Network analysis revealed a total of 108 potential targets derived from 22 component compounds of TXYF, among which 34 targets were common with the IBD-related targets. In the protein-protein interaction (PPI) network, 10 key targets were identified. The gene enrichment analysis suggested that anti-inflammatory processes, such as NF-kappa B signaling pathway and Toll-like receptor signaling pathway, could be the core processes involved in the action of TXYF in IBD. Molecular docking results revealed that three compounds present in TXYF exhibited strong binding affinity for PTGS2. The present study provides novel insights into the molecular mechanisms and network approaches of TXYF action in IBD from a systemic perspective. The potential targets and pathways identified in the present study would assist in further research on the clinical application of TXYF in IBD therapy.

The test data of metals, brittle materials and polymers in high, medium and low strain-rate range were summarized. It was found that the dynamic strength or yield stress of these materials was not sensitive to strain-rate in the low and high strain-rate range (corresponding to weak sensitivity area and saturated zone). But in the medium strain-rate range (strong sensitivity area), the dynamic strength or yield stress of these materials was extremely sensitive to strain-rate. The strain-rate effect function in classic Johnson-Cook constitutive model could not describe these phenomena in the range of low to high strain-rate. Therefore, the strain-rate effect function in classic Johnson-Cook constitutive model has been modified to a strain-rate effect expression which is suitable for different materials. This new model can better describe the phenomena of the weak sensitivity area, strong sensitivity area and saturated zone. With this model, the fitted curves are in good agreement with the test data, and the parameters are different for different materials. Finally, the fitting parameters are given.

Loss of Imprinting (LOI) of IGF2 and over-expressed IGF2 are associated with tumorigenesis. Our previous epidemiological study found a relatively high frequency of IGF2 LOI in healthy mid-gestation pregnant women. The aim of this study is to determine whether the expression of IGF2 is associated with its imprinting status in healthy Chinese pregnant women. The IGF2 imprinting status of 300 pregnant women was analyzed. 20 cases of IGF2 LOI and 20 cases of IGF2 retention of imprinting (ROI) were selected randomly for IGF2 expression analysis. The expression pattern of IGF2 between the group with IGF2 ROI and group with IGF2 LOI in healthy Chinese pregnant women was evaluated by real time PCR and western blot. The result showed no significant differences between IGF2 ROI and LOI groups in mRNA and protein levels. These results imply that IGF2 imprinting status has no obvious impact on its expression. There may be some unknown important factors other than imprinting status driving IGF2 expression.

Indirect resin composites are generally regarded to have better color stability than direct resin composites since they possess higher conversion degree. OBJECTIVE: The present study aimed at comparing the changes in color (ΔE) and color coordinates (ΔL, Δa and Δb) of one direct (Estelite Sigma: 16 shades) and 2 indirect resin composites (BelleGlass NG: 16 shades; Sinfony: 26 shades) after thermocycling. MATERIAL AND METHODS: Resins were packed into a mold and light cured; post-curing was performed on indirect resins. Changes in color and color coordinates of 1-mm-thick specimens were determined after 5,000 cycles of thermocycling on a spectrophotometer. RESULTS: ΔE values were in the range of 0.3 to 1.2 units for direct resins, and 0.3 to 1.5 units for indirect resins, which were clinically acceptable (ΔE<3.3). Based on t-test, ΔE values were not signifcantly different by the type of resins (p>0.05), while ΔL, Δa and Δb values were signifcantly different by the type of resins (p<0.05). For indirect resins, ΔE values were infuenced by the brand, shade group and shade designation based on three-way ANOVA (p<0.05). CONCLUSION: Direct and indirect resin composites showed similar color stability after 5,000 cycles of thermocycling; however, their changes in the color coordinates were different.

The purpose of this study was to determine the influence of incrementally added uncured HEMA in experimental HEMA-added glass ionomer cement (HAGICs) on the mechanical and shear bond strength (SBS) of these materials. Increasing contents of uncured HEMA (10-50 wt.%) were added to a commercial glass ionomer cement liquid (Fuji II, GC, Japan), and the compressive and diametral tensile strengths of the resulting HAGICs were measured. The SBS to non-precious alloy, precious alloy, enamel and dentin was also determined after these surfaces were subjected to either airborne-particle abrasion (Aa) or SiC abrasive paper grinding (Sp). Both strength properties of the HAGICs first increased and then decreased as the HEMA content increased, with a maximum value obtained when the HEMA content was 20% for the compressive strength and 40% for the tensile strength. The SBS was influenced by the HEMA content, the surface treatment, and the type of bonding surface (p<0.05). These results suggest that addition of an appropriate amount of HEMA to glass ionomer cement would increase diametral tensile strength as well as bond strength to alloys and teeth. These results also confirm that the optimal HEMA content ranged from 20 to 40% within the limitations of this experimental condition.

Calreticulin (CRT), a Ca2+-binding storage protein and chaperone in the endoplasmic reticulum, modulates cell adhesiveness and integrin-dependent Ca2+ signaling. However, the role of CRT during implantation remains poorly understood. In the present study, we characterized the expression of CRT mRNA and the protein in mouse endometria from pregnancy DI to D7. Real-Time PCR and in situ hybridization results showed that the levels of CRT mRNA in the endometria of pregnant mice were significantly higher than those of non-pregnant mice (P<0.05), and increased gradually from pregnancy DI to D4, reaching the máximum level on D4, followed by a plateau from D4 to D7. Using immunofluorescence histochemistry and western blot, changes of CRT expression in the endometria of pregnant mice were consistent with the expression of CRT mRNA. Furthermore, antisense CRT oligodeoxynucleotide was injected into the uterus horns of pregnant mice (D3) to investígate its effect on embryo implantation. The result showed that the number of implanted embryos markedly decreased in the side of uterine horns receiving antisense CRT oligodeoxynucleotide(í><0.05). These findings suggest that CRT may play an important role in embryo implantation in mice.